> For the complete documentation index, see [llms.txt](https://sensorbeeab.gitbook.io/sensorbeeab-docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://sensorbeeab.gitbook.io/sensorbeeab-docs/readme/sensorbee-modbus-product-manual/sensorbee-modbus-lite/quick-start-guide/2.-required-tools-and-equipment.md).

# 2. Required Tools and Equipment

Sensorbee Documentation

***

To install the Sensorbee Modbus Lite, the following tools are recommended:

* PH2 Phillips head screwdriver
* Cutter for stainless steel hose clamp (for mast installation)
* Screwdriver or 6mm socket wrench (for mast installation).
* Screwdriver and two screws (for wall installation).

***

Helpful?