> For the complete documentation index, see [llms.txt](https://sensorbeeab.gitbook.io/sensorbeeab-docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://sensorbeeab.gitbook.io/sensorbeeab-docs/readme/sensorbee-air-product-manual/sensorbee-air-pro-2/quick-start-guide/2.installation-guide/2.-required-tools-and-equipment.md).

# 2. Required tools and equipment

To install the Sensorbee Air Pro 2, the following tools are recommended:

* PH2 Phillips head screwdriver
* PH1 Phillips head screwdriver
* T10 torx screwdriver
* Flat headed screwdriver (Gas sensor plugs)
* Cutter for stainless steel hose clamp (for mast installation)
* Screwdriver or 6mm socket wrench (for mast installation).
* Screwdriver and two screws (for wall installation).

(Screwdriver and four screws are needed for wall solar panel installation.)\\